Google Conversion Lift now checks your data first
Conversion Lift is Google Ads' own incrementality test: part of your audience does not see your ads, and Google compares how often both groups convert. The result tells you how many conversions your campaigns really caused, instead of how many they were credited with.
Google has now added a section called Data readiness for incrementality to its help article on setting up user-based Conversion Lift. It lists the checks your conversion data has to pass before a study, and the setups a study cannot use at all. Most of it is about tracking, not about campaigns. This article goes through the list and shows which parts the Measurebase audit already checks for you.
Why the data matters more in a lift study
A normal conversion report can lean on ad clicks: the gclid on the landing page connects a sale to an ad. In a lift study that does not work, because the control group never saw an ad and so never clicked one. Google has to recognise people in both groups by the data that arrives with each conversion, mainly a hashed email address or phone number. Conversions without that data cannot be placed in either group and do not count.
That is why the new checks are almost all about enhanced conversions, consent and how complete your conversion data is.
Who can run a study
Google says Conversion Lift is not available for every Google Ads account; you ask your Google account representative. The help article names these minimums:
- At least 1,000 observed conversions. Conversions that only have supplementary data do not count toward this.
- A campaign budget of at least USD 5,000.
- At least one conversion action that Conversion Lift can use.
- Search, Display, Video, Demand Gen, App or Performance Max campaigns. A campaign can be in one lift study at a time.
A study can run for 7 days, but Google recommends more than 14, especially when people take a while to convert.
The checks Google lists
Google recommends three things before any study: enhanced conversions for web and for offline actions, advanced consent mode (for campaigns that target the EEA), and first-party tagging through Google tag gateway. Then it lists what it checks:
- Enhanced conversions: switched on for every eligible web action, and the customer data terms accepted in the account.
- User data on conversions: a good share of tag hits carry user-provided data, the email address is present on most of them, and the data is formatted correctly (lowercase, trimmed, SHA-256; phone in E.164; an address needs first name, last name, postal code and country).
- Server uploads: conversions sent through the API match the website tag by transaction ID, the tag sends a transaction ID on every hit, at least 30% of uploads carry hashed user data, and uploads arrive within 24 hours.
- Leads and offline imports: enhanced conversions for leads switched on, imports that carry hashed user data and not only a click ID, and imports with user data in the last 7 days.
- Consent: advanced consent mode on web actions when campaigns target the EEA, the UK or other DMA regions. Google says basic consent mode is not enough there.
- Web and app kept apart: web and app conversions in separate conversion actions. An action that mixes them loses all its data in the study.
Google adds three good habits: send each conversion's own value and a valid currency (lift studies use the raw value, not your conversion value rules), send more than one kind of user data and always the email address, and have 7 to 14 days of clean data before the study starts. It also suggests routing about 75 to 80% of web conversion traffic through a first-party domain.
Setups a study cannot use
Google also lists setups it does not check or flag, but that a user-based study simply cannot use:
- Conversions imported from GA4. GA4 key events imported into Google Ads are not supported, including GA4's user-provided data.
- Offline imports with only a click ID. A gclid, gbraid or wbraid without hashed user data cannot be used, because the control group has no click. Google advises not to import gbraid or wbraid at all for actions in a study.
- Matching on anything but user data. IP address, device data and session details are ignored.
- Custom variables on enhanced conversions for leads uploads.
- App campaigns that target iOS, and Travel ads.
If your main conversion is a GA4 import, a lift study will not see it. Set up a Google Ads conversion tag for the same action first, and give it two weeks of data.
What the Measurebase audit already checks
Several of Google's checks match checks the Measurebase audit runs every night on your Tag Manager container, your traffic and your Google Ads account:
| Google's check | Measurebase audit |
|---|---|
| Customer data terms accepted | Enhanced conversions terms are not accepted |
| Share of hits with user-provided data | Few conversions carry user-provided data (flags under 50% of purchases and leads) |
| Advanced consent mode | Consent Mode v2 signals are missing · No Consent Mode signals in your traffic · User data is collected without ad_user_data |
| First-party tagging | Container does not load through your domain · The site uses the standard GTM snippet |
| Transaction ID on every hit | Purchases without a transaction ID |
| Each conversion's own value and currency | Purchase action uses a fixed value · Purchases use another currency than GA4 · Purchases with zero value |
| Offline imports working | Offline conversion uploads need attention · Offline conversion uploads stopped |
The audit does not check everything on Google's list. It does not see your account's eligibility, your budget or the 1,000 conversions, whether an action mixes web and app, how your own API uploads are timed or hashed, or whether an offline import carries user data next to the click ID. For those, use the diagnostics in Google Ads (step 2 below). Google names its own tag gateway for first-party tagging; it does not say whether other first-party setups, like a server container on your own domain, count toward the 75 to 80%.
1Check that you can run a study
Ask your Google account representative whether Conversion Lift is open for your account, and check the minimums: 1,000 conversions and USD 5,000 of budget on the campaigns in the study. Without that, the data checks below are still worth doing, but there will be no study.
2Read the diagnostics in Google Ads
In Google Ads, go to Goals, Conversions, Summary and open Diagnostics. Several of Google's checks show there: the share of hits with user data, a missing email parameter and formatting errors. Check the enhanced conversions settings and the customer data terms under Goals, Settings.
3Run the Measurebase audit
In the Measurebase dashboard, connect Google Ads and Tag Manager for the domain. The audit then runs every night and lists the checks in the table above, each with a fix. The Tag Manager fixes can go into a workspace named "Measurebase" for you to preview and publish. Fix the consent and user data findings first: those are the ones a lift study depends on most.
4Choose the conversion actions for the study
Pick actions that a lift study can use: a Google Ads conversion tag or an offline import with hashed user data. Leave out GA4 imports and imports with only click IDs. Keep web and app in separate actions, and select both if you run a web study for a business with an app.
5Give it two weeks before you start
Google asks for 7 to 14 days of continuous data with enhanced conversions and consent mode working before the study starts. Make your changes, then wait. A study that starts the day after a fix measures the old setup for most of its first week.
Frequently asked questions
What is Conversion Lift?
A test in Google Ads that holds back part of your audience from your ads and compares how often both groups convert. The difference is the number of conversions your ads caused.
Can every advertiser run a Conversion Lift study?
No. Google says it is not available for every account; ask your Google account representative. It also needs at least 1,000 conversions and a campaign budget of at least USD 5,000.
Why can a study not use GA4 conversions?
Google lists GA4 conversion imports as not supported in user-based Conversion Lift. The study needs a Google Ads conversion tag or an offline import with hashed user data.
Why is a click ID not enough?
The control group in a lift study never sees an ad, so it never clicks one. Google recognises both groups by hashed user data, such as an email address, not by click IDs.
Does Measurebase run lift studies?
No. Studies run in Google Ads. Measurebase checks the tracking a study depends on: enhanced conversions, consent, first-party tagging, transaction IDs, values and offline uploads.
When did Google add this section?
Google's help page shows no date. The PPC Times reported the new section on 15 November 2026.